- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
SIZE | WEIGHT | PCS/CTN |
25x20 32x20 32x25 40x20 40x25 40x32 50x20 50x25 50x32 50x40 63x32 63x40 63x50 75x40 75x50 75x63 90x63 90x75 110x63 110x75 110x90 | 100 128 147 205 233 254 321 345 371 449 546 614 721 784 894 1038 1392 1584 2032 2197 2496 | 120 80 74 40 40 40 27 27 26 25 19 18 12 9 9 9 6 6 6 6 6 |
Description
PP compression fittings for HDPE pressure piping applications.
Fast and reliable connections.
Extensively used worldwide.
Range
from 20mm to 110 mm
Wroking Pressure
Pressure Rating:200psi@73℃(23℃)
Features
Easy for installation.
One source for all your metric needs and BSP/NTP connections.
UV stablilized.
Applications
Water distribution.
Industrial pipe systems.
Irrigation.
Mines,highland and desert using.
Seko Plastic
D16mm-D63mm(recommeded)
A Chamfer the pipe with the beveler tool(coode05160)
B Slacken the ring nut without removing from the body Check that O-ring and clip ring are in proper position.
C Insert the pipe end without tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop.
D Hand tighten the ring unt then tighten further with a strap/chain wrench.
D75mm-D110mm(recommended)
A Atfer preparing pipe ends,unscrew the fitting.Then,remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ring.
B Push the pipe into the fittins until it reaches the slop.Insert the O-ring and position the same by inserting the packing-presser bush.
C Displace the clip ring onto the pipe as shown in picture C.
D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to compete the assembly.
SIZE | WEIGHT | PCS/CTN |
25x20 32x20 32x25 40x20 40x25 40x32 50x20 50x25 50x32 50x40 63x32 63x40 63x50 75x40 75x50 75x63 90x63 90x75 110x63 110x75 110x90 | 100 128 147 205 233 254 321 345 371 449 546 614 721 784 894 1038 1392 1584 2032 2197 2496 | 120 80 74 40 40 40 27 27 26 25 19 18 12 9 9 9 6 6 6 6 6 |
Description
PP compression fittings for HDPE pressure piping applications.
Fast and reliable connections.
Extensively used worldwide.
Range
from 20mm to 110 mm
Wroking Pressure
Pressure Rating:200psi@73℃(23℃)
Features
Easy for installation.
One source for all your metric needs and BSP/NTP connections.
UV stablilized.
Applications
Water distribution.
Industrial pipe systems.
Irrigation.
Mines,highland and desert using.
Seko Plastic
D16mm-D63mm(recommeded)
A Chamfer the pipe with the beveler tool(coode05160)
B Slacken the ring nut without removing from the body Check that O-ring and clip ring are in proper position.
C Insert the pipe end without tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop.
D Hand tighten the ring unt then tighten further with a strap/chain wrench.
D75mm-D110mm(recommended)
A Atfer preparing pipe ends,unscrew the fitting.Then,remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ring.
B Push the pipe into the fittins until it reaches the slop.Insert the O-ring and position the same by inserting the packing-presser bush.
C Displace the clip ring onto the pipe as shown in picture C.
D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to compete the assembly.
