- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
SIZE | NUMBER OF SCREWS | WEIGHT | PCS/CTN | PACKING SIZE(mm) | ||
25x1/2" 25x3/4" 32x1/2" 32x3/4" 32x1" 40x1/2" 40x3/4" 40x1" 50x1/2" 50x3/4" 50x1" 63X1/2" 63X3/4" 63X1" 75X1/2" 75X3/4" 75X1" 90X1/2" 90X3/4" 90X1" 110X1/2" 110X3/4" 110x1" | 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 | 109 114 105 107 111 108 115 120 143 145 146 257 257 257 330 330 330 316 320 327 415 415 370 | 200 200 200 200 200 160 160 160 150 150 150 100 100 100 100 100 100 50 50 50 30 30 30 | 45 45 45 45 45 45 45 45 48 48 48 50 50 50 56 56 56 56 56 56 56 56 56 | 35 35 35 35 35 35 35 35 38 38 38 30 30 30 35 35 35 41 41 41 35 35 41 | 35 35 35 35 37 31 31 31 34 34 34 26.5 26.5 26.5 35 35 35 33 33 33 35 35 35 |
216204
Desciption
PP compression fittings for HDPE pressure piping applications.
Fast and reliable connections.
Extensively used worldwide.
Range
from 20mm to 110 mm
Wroking Pressure
Pressure Rating:200psi@73℃(23℃)
Features
Easy for installation.
One source for all your metric needs and BSP/NTP connections.
UV stablilized.
Applications
Water distribution.
Industrial pipe systems.
Irrigation.
Mines,highland and desert using.
Seko Plastic
D16mm-D63mm(recommeded)
A Chamfer the pipe with the beveler tool(coode05160)
B Slacken the ring nut without removing from the body Check that O-ring and clip ring are in proper position.
C Insert the pipe end without tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop.
D Hand tighten the ring unt then tighten further with a strap/chain wrench.
D75mm-D110mm(recommended)
A Atfer preparing pipe ends,unscrew the fitting.Then,remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ring.
B Push the pipe into the fittins until it reaches the slop.Insert the O-ring and position the same by inserting the packing-presser bush.
C Displace the clip ring onto the pipe as shown in picture C.
D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to compete the assembly.
SIZE | NUMBER OF SCREWS | WEIGHT | PCS/CTN | PACKING SIZE(mm) | ||
25x1/2" 25x3/4" 32x1/2" 32x3/4" 32x1" 40x1/2" 40x3/4" 40x1" 50x1/2" 50x3/4" 50x1" 63X1/2" 63X3/4" 63X1" 75X1/2" 75X3/4" 75X1" 90X1/2" 90X3/4" 90X1" 110X1/2" 110X3/4" 110x1" | 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 | 109 114 105 107 111 108 115 120 143 145 146 257 257 257 330 330 330 316 320 327 415 415 370 | 200 200 200 200 200 160 160 160 150 150 150 100 100 100 100 100 100 50 50 50 30 30 30 | 45 45 45 45 45 45 45 45 48 48 48 50 50 50 56 56 56 56 56 56 56 56 56 | 35 35 35 35 35 35 35 35 38 38 38 30 30 30 35 35 35 41 41 41 35 35 41 | 35 35 35 35 37 31 31 31 34 34 34 26.5 26.5 26.5 35 35 35 33 33 33 35 35 35 |
216204
Desciption
PP compression fittings for HDPE pressure piping applications.
Fast and reliable connections.
Extensively used worldwide.
Range
from 20mm to 110 mm
Wroking Pressure
Pressure Rating:200psi@73℃(23℃)
Features
Easy for installation.
One source for all your metric needs and BSP/NTP connections.
UV stablilized.
Applications
Water distribution.
Industrial pipe systems.
Irrigation.
Mines,highland and desert using.
Seko Plastic
D16mm-D63mm(recommeded)
A Chamfer the pipe with the beveler tool(coode05160)
B Slacken the ring nut without removing from the body Check that O-ring and clip ring are in proper position.
C Insert the pipe end without tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop.
D Hand tighten the ring unt then tighten further with a strap/chain wrench.
D75mm-D110mm(recommended)
A Atfer preparing pipe ends,unscrew the fitting.Then,remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ring.
B Push the pipe into the fittins until it reaches the slop.Insert the O-ring and position the same by inserting the packing-presser bush.
C Displace the clip ring onto the pipe as shown in picture C.
D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to compete the assembly.
